Change Details

NOTE: These instructions are outdated. The recommended way to set up your system and build echo is to clone the rEI repository and run `./SetupEcho.sh` and follow the prompts. First see [[technical_documents/trusting_the_site/|Trusting The Site]]. =Installing Prerequisites= ==On Ubuntu-based Linux== Enter these commands into the Terminal: sudo apt-get update sudo apt-get install g++ build-essential -y sudo apt-get install libbullet-dev libmodplug-dev libogg-dev libfreetype6-dev libopenal-dev libsigc++-2.0-dev \ libgtkglext1-dev libboost-all-dev libpng12-dev libprotobuf-dev libvorbis-dev libglew-dev libgtkmm-2.4-dev \ libgtkglextmm-x11-1.2-dev libtinyxml-dev libutfcpp-dev libgtkmm-2.4-dev libgtkglextmm-x11-1.2-dev -y This should install the Boost Libraries; however, if you're having difficulties, see [[technical_documents/installing_or_upgrading_boost/|Installing or upgrading boost]]. See also [[tools/gpp/|Installing `g++`]]. =Building Echo= Ensure you have Mercurial installed: sudo apt-get install mercurial You should have access to [[diffusion|the repositories]]. Clone [[diffusion/EE|Echo3 ]] (assuming a working directory of `~/Projects`): hg clone https://phabricator.seantasker.com/diffusion/EE/echo3/ ~/Projects/ These instructions assume that you now have the following directory structure: - `~` (home or user directory) -- `Projects` --- `echo3` Open the `echo3` project in [[tools/netbeans|NetBeans]] and Build from there.

=Installing Prerequisites= The recommended way to set up your system and build Echo is to do the following. ==On Ubuntu-based Linux== - Ensure you have Mercurial installed (one way is to run the following commands in a Terminal): ``` sudo apt-get update sudo apt-get install mercurial ``` - Ensure you have access to [[diffusion|the repositories]]. - Ensure you have updated the host fingerprint as per the [[technical_documents/repositories/|Repositories]] page. This will avoid any certificate errors when attempting to clone. - Clone the rEI Echo installer repository into the desired location. - Run `sudo ./SetupEcho.sh` and follow the prompts. =Building Echo= Do one of the following: # Navigate to the cloned EchoInstaller directory and run `./BuildEcho.sh`. # Open the `echo3` project in [[tools/netbeans|NetBeans]] and Build from there.

NOTE: These instructions are outdated. The recommended way to set up your system and build echo is to clone the rEI repository and run `./SetupEcho.sh` and follow the prompts. First see [[technical_documents/trusting_the_site/|Trusting The Site]]. =Installing Prerequisites= The recommended way to set up your system and build Echo is to do the following. ==On Ubuntu-based Linux== Enter these commands into- Ensure you have Mercurial installed (one way is to run the following commands in a Terminal:): sudo apt-get update``` sudo apt-get install g++ build-essential -yt update sudo apt-get install libbullet-dev libmodplug-dev libogg-dev libfreetype6-dev libopenal-dev libsigc++-2.0-dev \ll mercurial libgtkglext1-dev libboost-all-dev libpng12-dev libprotobuf-dev libvorbis-dev libglew-dev libgtkmm-2.4-dev \``` libgtkglextmm-x11-1.2-dev libtinyxml-dev libutfcpp-dev libgtkmm-2.4-dev libgtkglextmm-x11-1.2-dev -y This should install the Boost Libraries; however, if you're having difficulties, see [[technical_documents/installing_or_upgrading_boost/|Installing or upgrading boost]]. See also [[tools/gpp/|Installing `g++`]]. =Building Echo=- Ensure you have access to [[diffusion|the repositories]]. Ensure you have Mercurial installed:- Ensure you have updated the host fingerprint as per the [[technical_documents/repositories/|Repositories]] page. This will avoid any certificate errors when attempting to clone. sudo apt-get- Clone the rEI Echo install mercurial You should have access to [[diffusion|the repositories]]er repository into the desired location. Clone [[diffusion/EE|Echo3 ]] (assuming a working directory of `~/Projects`): hg clone https://phabricator.seantasker.com/diffusion/EE/echo3/ ~/Projects/- Run `sudo ./SetupEcho.sh` and follow the prompts. =Building Echo= These instructions assume that you now haveDo one of the following directory structure:: - `~` (home or us# Navigate to the cloned EchoInstaller directory) -- `Projects` and run `./BuildEcho.sh`. --- `echo3` # Open the `echo3` project in [[tools/netbeans|NetBeans]] and Build from there.